How to Install and Uninstall bladerf-fpga-hostedxa9 Package on Kali Linux

Last updated: November 24,2024

1. Install "bladerf-fpga-hostedxa9" package

This tutorial shows how to install bladerf-fpga-hostedxa9 on Kali Linux


    
        
            $
        

        
            
                sudo apt update
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt install
            
                        
                bladerf-fpga-hostedxa9
            
                    
    
    Copied

2. Uninstall "bladerf-fpga-hostedxa9" package

In this section, we are going to explain the necessary steps to uninstall bladerf-fpga-hostedxa9 on Kali Linux:


    
        
            $
        

        
            
                sudo apt remove
            
                        
                bladerf-fpga-hostedxa9
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt autoclean && sudo apt autoremove
            
                    
    
    Copied

3. Information about the bladerf-fpga-hostedxa9 package on Kali Linux

Package: bladerf-fpga-hostedxa9
Source: bladerf
Version: 0.2023.02-4
Installed-Size: 41
Maintainer: A. Maitland Bottoms
Architecture: all
Provides: bladerf-fpga
Depends: wget
Recommends: bladerf
Suggests: bladerf-firmware
Size: 21396
SHA256: f27f4c30e9a24c2180f0fd564b8268a865877ab6666259525174153ced561b1c
SHA1: 1c87a8c9cc1f97254b34280a2907f4e43c7a1622
MD5sum: 1da17c73ce05a57674c6b378acd05f71
Description: Nuand bladeRF FPGA bitstream downloader (hostedxA9)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
.
This bitstream is for the bladeRF 2.0 Micro xA9 with the Altera Cyclone V
5CEBA9 FPGA.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
Description-md5:
Homepage: https://www.Nuand.com/bladeRF
Section: contrib/comm
Priority: optional
Filename: pool/contrib/b/bladerf/bladerf-fpga-hostedxa9_0.2023.02-4_all.deb