How to Install and Uninstall ddcutil Package on Kali Linux
Last updated: December 23,2024
1. Install "ddcutil" package
This guide let you learn how to install ddcutil on Kali Linux
$
sudo apt update
Copied
$
sudo apt install
ddcutil
Copied
2. Uninstall "ddcutil" package
Please follow the steps below to uninstall ddcutil on Kali Linux:
$
sudo apt remove
ddcutil
Copied
$
sudo apt autoclean && sudo apt autoremove
Copied
3. Information about the ddcutil package on Kali Linux
Package: ddcutil
Version: 1.4.1-1
Installed-Size: 957
Maintainer: Sanford Rockowitz
Architecture: amd64
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.66), libglib2.0-0 (>= 2.64), libkmod2 (>= 5~), libudev1 (>= 183), libx11-6, libxrandr2 (>= 2:1.2.99.2), pci.ids, usb.ids, usbutils, i2c-tools (>= 4.0)
Size: 310324
SHA256: e7b67fa1b6300221f13142fc108d2c96977aa83d862cfb1824ae96929d5b4d45
SHA1: 0df1ac384862529005e9d1e9f6bde55f5e47a998
MD5sum: 267be35617fbe048d8ff6a5536c71606
Description: Control monitor settings - Standalone command line application
ddcutil is used to query and change monitor settings.
.
ddcutil communicates with monitors implementing MCCS (Monitor Control Command
Set). Normally, communication is performed using the DDC/CI protocol on the
I2C bus. Alternatively, communication can be performed over USB as per the
USB Monitor Control Class Specification.
Description-md5:
Homepage: https://www.ddcutil.com
Section: utils
Priority: optional
Filename: pool/main/d/ddcutil/ddcutil_1.4.1-1_amd64.deb
Version: 1.4.1-1
Installed-Size: 957
Maintainer: Sanford Rockowitz
Architecture: amd64
Depends: libc6 (>= 2.34), libdrm2 (>= 2.4.66), libglib2.0-0 (>= 2.64), libkmod2 (>= 5~), libudev1 (>= 183), libx11-6, libxrandr2 (>= 2:1.2.99.2), pci.ids, usb.ids, usbutils, i2c-tools (>= 4.0)
Size: 310324
SHA256: e7b67fa1b6300221f13142fc108d2c96977aa83d862cfb1824ae96929d5b4d45
SHA1: 0df1ac384862529005e9d1e9f6bde55f5e47a998
MD5sum: 267be35617fbe048d8ff6a5536c71606
Description: Control monitor settings - Standalone command line application
ddcutil is used to query and change monitor settings.
.
ddcutil communicates with monitors implementing MCCS (Monitor Control Command
Set). Normally, communication is performed using the DDC/CI protocol on the
I2C bus. Alternatively, communication can be performed over USB as per the
USB Monitor Control Class Specification.
Description-md5:
Homepage: https://www.ddcutil.com
Section: utils
Priority: optional
Filename: pool/main/d/ddcutil/ddcutil_1.4.1-1_amd64.deb