How to Install and Uninstall osmo-bts Package on Kali Linux

Last updated: April 25,2024

1. Install "osmo-bts" package

This guide covers the steps necessary to install osmo-bts on Kali Linux


    
        
            $
        

        
            
                sudo apt update
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt install
            
                        
                osmo-bts
            
                    
    
    Copied

2. Uninstall "osmo-bts" package

This guide let you learn how to uninstall osmo-bts on Kali Linux:


    
        
            $
        

        
            
                sudo apt remove
            
                        
                osmo-bts
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt autoclean && sudo apt autoremove
            
                    
    
    Copied

3. Information about the osmo-bts package on Kali Linux

Package: osmo-bts
Source: osmo-bts (1.5.0+dfsg1-2)
Version: 1.5.0+dfsg1-2+b2
Installed-Size: 1366
Maintainer: Debian Mobcom Maintainers
Architecture: amd64
Depends: libc6 (>= 2.34), libosmoabis10 (>= 1.3.0), libosmocodec0 (>= 1.7.0), libosmocoding0 (>= 1.7.0), libosmocore19 (>= 1.7.0), libosmoctrl0 (>= 1.7.0), libosmogsm18 (>= 1.7.0), libosmotrau2 (>= 1.3.0), libosmovty9 (>= 1.7.0), libtalloc2 (>= 2.0.4~git20101213)
Suggests: osmo-bsc
Size: 276484
SHA256: 04080d7f68ca195fe17bc19ca93bf5b5649b3c3f152128649c4dd8883ea9ff5e
SHA1: d95a15329c840cdad36c98b2c850f10c31e73950
MD5sum: 1f2f39ea22ab0b2c115b07c2297c900b
Description: Base Transceiver Station for GSM
OsmoBTS is a software implementation of Layer2/3 of a BTS. It implements the
following protocols/interfaces:
LAPDm (GSM 04.06)
RTP
A-bis/IP in IPA multiplex
OML (GSM TS 12.21)
RSL (GSM TS 08.58)
.
OsmoBTS is modular and has support for multiple back-ends. A back-end talks to
a specific L1/PHY implementation of the respective BTS hardware. Based on this
architecture, it should be relatively easy to add a new back-end to support
so-far unsupported GSM PHY/L1 and associated hardware.
Description-md5:
Homepage: http://openbsc.osmocom.org/trac/wiki/OsmoBTS
Section: net
Priority: optional
Filename: pool/main/o/osmo-bts/osmo-bts_1.5.0+dfsg1-2+b2_amd64.deb