How to Install and Uninstall qthid-fcd-controller Package on Kali Linux

Last updated: May 19,2024

1. Install "qthid-fcd-controller" package

Please follow the step by step instructions below to install qthid-fcd-controller on Kali Linux


    
        
            $
        

        
            
                sudo apt update
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt install
            
                        
                qthid-fcd-controller
            
                    
    
    Copied

2. Uninstall "qthid-fcd-controller" package

This guide let you learn how to uninstall qthid-fcd-controller on Kali Linux:


    
        
            $
        

        
            
                sudo apt remove
            
                        
                qthid-fcd-controller
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt autoclean && sudo apt autoremove
            
                    
    
    Copied

3. Information about the qthid-fcd-controller package on Kali Linux

Package: qthid-fcd-controller
Source: qthid-fcd-controller (4.1-6)
Version: 4.1-6+b1
Installed-Size: 391
Maintainer: Debian Hamradio Maintainers
Architecture: amd64
Depends: libc6 (>= 2.34), libgcc-s1 (>= 3.0), libhidapi-hidraw0 (>= 0.8.0~rc1+git20140201.3a66d4e+dfsg), libhidapi-libusb0 (>= 0.8.0~rc1+git20140201.3a66d4e+dfsg), libqt5core5a (>= 5.15.1), libqt5gui5 (>= 5.2.0) | libqt5gui5-gles (>= 5.2.0), libqt5widgets5 (>= 5.0.2), libstdc++6 (>= 5)
Recommends: udev
Suggests: gnuradio, gqrx-sdr, gr-fcdproplus, gr-osmosdr
Size: 152008
SHA256: 835cc6587e949f67082b09abb70daeb6ac5934dc603e033442355aa8ef69d896
SHA1: 0cec05e998620fda7cfc5607088793a4fc9ed3b6
MD5sum: 5035558c2db975710b2634d89dd670fb
Description: Funcube Dongle controller
Controller application for the Funcube Dongle software defined radio receiver,
built using the HID API library and the Qt GUI toolkit.
.
The Funcube Dongle is a small software defined radio receiver for
64 MHz - 1.7 GHz. It fits into a computer's USB port and uses USB audio
to transfer complex I/Q data to SDR applications. The control API for
setting frequency, gain, filter, etc. uses the USB HID standard.
.
It provides full support for the Funcube Dongle API::
* Change frequency and apply frequency correction.
* Change RF gains and filters.
* Change IF gains and filters.
* LNA enhancement, bias current, etc.
* I/Q correction.
* Auto-repeat tuning buttons (click and hold button to scan).
* Variable frequency step.
* Upgrade and verify the firmware.
Description-md5:
Homepage: https://oz9aec.net/radios/funcube-dongle/updated-fcdctl-for-the-funcube-dongle-pro-and-pro
Tag: uitoolkit::qt
Section: science
Priority: optional
Filename: pool/main/q/qthid-fcd-controller/qthid-fcd-controller_4.1-6+b1_amd64.deb