How to Install and Uninstall remotetrx Package on Kali Linux

Last updated: December 03,2024

1. Install "remotetrx" package

Please follow the guidelines below to install remotetrx on Kali Linux

$ sudo apt update $ sudo apt install remotetrx

2. Uninstall "remotetrx" package

This guide let you learn how to uninstall remotetrx on Kali Linux:

$ sudo apt remove remotetrx $ sudo apt autoclean && sudo apt autoremove

3. Information about the remotetrx package on Kali Linux

Package: remotetrx
Source: svxlink (19.09.2-1)
Version: 19.09.2-1+b1
Installed-Size: 1090
Maintainer: Debian Hamradio Maintainers
Architecture: amd64
Depends: libasyncaudio1.6 (>= 19.09.2), libasynccore1.6 (>= 19.09.2), libasynccpp1.6 (>= 19.09.2), libc6 (>= 2.34), libgcc-s1 (>= 4.0), libgcrypt20 (>= 1.10.0), libpopt0 (>= 1.14), librtlsdr2 (>= 2.0.1), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 13.1), svxlink-gpio (= 19.09.2-1), adduser, lsb-base (>= 3.0-6)
Recommends: svxlink-server (= 19.09.2-1+b1), svxlink-calibration-tools (= 19.09.2-1+b1)
Size: 335932
SHA256: 0b95872fbb3491ccb8ea632373baed8d8467b2916f5eea3907e606edd248b5ba
SHA1: d10324dff10c5d1e23e89de14f8440698678c5ba
MD5sum: 72d77ebda090486d7073b13526c9f14a
Description: Remote controller for radio transceivers
The RemoteTrx server facilitates remote control of amateur radio
transceivers via the EchoLink® protocol. It is normally
used together with the 'svxlink-server' package, which allows
for nearly world-wide access from the Internet.
.
EchoLink® allows licensed amateur radio operators to communicate
over the Internet, including remote access to station equipment.
The RemoteTrx server provides remote control of a connected radio
transceiver. EchoLink® is a registered trademark of
Synergenics, LLC.
Description-md5:
Homepage: http://www.svxlink.org
Section: hamradio
Priority: optional
Filename: pool/main/s/svxlink/remotetrx_19.09.2-1+b1_amd64.deb