How to Install and Uninstall repsnapper Package on Kali Linux
Last updated: December 23,2024
Deprecated! Installation of this package may no longer be supported.
1. Install "repsnapper" package
This tutorial shows how to install repsnapper on Kali Linux
$
sudo apt update
Copied
$
sudo apt install
repsnapper
Copied
2. Uninstall "repsnapper" package
Please follow the step by step instructions below to uninstall repsnapper on Kali Linux:
$
sudo apt remove
repsnapper
Copied
$
sudo apt autoclean && sudo apt autoremove
Copied
3. Information about the repsnapper package on Kali Linux
Package: repsnapper
Version: 2.5a5-3
Installed-Size: 2774
Maintainer: Ying-Chun Liu (PaulLiu)
Architecture: amd64
Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.29), libcairomm-1.0-1v5 (>= 1.12.0), libgcc-s1 (>= 3.0), libgl1, libglib2.0-0 (>= 2.31.8), libglibmm-2.4-1v5 (>= 2.64.2), libglu1-mesa | libglu1, libgtk2.0-0 (>= 2.8.0), libgtkglextmm-x11-1.2-0v5 (>= 1.2.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.42.0), libpolyclipping22 (>= 6.4.2), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 9), libxml++2.6-2v5 (>= 2.40.0), libzip4 (>= 0.10)
Size: 714460
SHA256: bd90109dec0aa7615d9b956f6179309932ca90b0f6e1d9402432cf94ec531d36
SHA1: 45c475577c4a63ca28ce6b23277e969f9e4ed36a
MD5sum: cbac5466ae631cca588ba1dfa4f50bbc
Description: STL to GCode Converter and print software for RepRap machines
A RepRap is a 3D printer: a machine which can print 3-dimensional plastic
objects from a computer model. Repsnapper can convert STL, which can be
created with most 3D drawing programs like Blender, into GCode, which the
RepRap can understand. It can also be used to send the result to the RepRap.
Description-md5: d95156a7bdcd60c9b6efae475b53a77f
Homepage: http://reprap.org/wiki/RepSnapper_Manual:Introduction
Tag: uitoolkit::gtk
Section: utils
Priority: optional
Filename: pool/main/r/repsnapper/repsnapper_2.5a5-3_amd64.deb
Version: 2.5a5-3
Installed-Size: 2774
Maintainer: Ying-Chun Liu (PaulLiu)
Architecture: amd64
Depends: libatkmm-1.6-1v5 (>= 2.24.0), libc6 (>= 2.29), libcairomm-1.0-1v5 (>= 1.12.0), libgcc-s1 (>= 3.0), libgl1, libglib2.0-0 (>= 2.31.8), libglibmm-2.4-1v5 (>= 2.64.2), libglu1-mesa | libglu1, libgtk2.0-0 (>= 2.8.0), libgtkglextmm-x11-1.2-0v5 (>= 1.2.0), libgtkmm-2.4-1v5 (>= 1:2.24.0), libpangomm-1.4-1v5 (>= 2.42.0), libpolyclipping22 (>= 6.4.2), libsigc++-2.0-0v5 (>= 2.8.0), libstdc++6 (>= 9), libxml++2.6-2v5 (>= 2.40.0), libzip4 (>= 0.10)
Size: 714460
SHA256: bd90109dec0aa7615d9b956f6179309932ca90b0f6e1d9402432cf94ec531d36
SHA1: 45c475577c4a63ca28ce6b23277e969f9e4ed36a
MD5sum: cbac5466ae631cca588ba1dfa4f50bbc
Description: STL to GCode Converter and print software for RepRap machines
A RepRap is a 3D printer: a machine which can print 3-dimensional plastic
objects from a computer model. Repsnapper can convert STL, which can be
created with most 3D drawing programs like Blender, into GCode, which the
RepRap can understand. It can also be used to send the result to the RepRap.
Description-md5: d95156a7bdcd60c9b6efae475b53a77f
Homepage: http://reprap.org/wiki/RepSnapper_Manual:Introduction
Tag: uitoolkit::gtk
Section: utils
Priority: optional
Filename: pool/main/r/repsnapper/repsnapper_2.5a5-3_amd64.deb