How to Install and Uninstall vde2-slirp Package on openSUSE Leap
Last updated: November 23,2024
1. Install "vde2-slirp" package
Please follow the instructions below to install vde2-slirp on openSUSE Leap
$
sudo zypper refresh
Copied
$
sudo zypper install
vde2-slirp
Copied
2. Uninstall "vde2-slirp" package
This guide covers the steps necessary to uninstall vde2-slirp on openSUSE Leap:
$
sudo zypper remove
vde2-slirp
Copied
3. Information about the vde2-slirp package on openSUSE Leap
Information for package vde2-slirp:
-----------------------------------
Repository : Main Repository
Name : vde2-slirp
Version : 2.3.2+svn587-3.23
Arch : x86_64
Vendor : SUSE LLC
Installed Size : 99.7 KiB
Installed : No
Status : not installed
Source package : vde2-2.3.2+svn587-3.23.src
Upstream URL : http://vde.sourceforge.net/
Summary : VDE ecryption module
Description :
slirpvde is a slirp interface for a VDE network.
Slirpvde connects all the units (virtual or real machines) to the network
of the host where slirpvde runs as it were a NAT/Masquerading router.
The default route is the node 2 (10.0.2.2 in the default network configuration)
and DNS is re-mapped in node 3 (10.0.2.3).
Slirpvde runs using standard user privileges (no need for root access):
all the connections are re-generated by slirpvde itself.
IPv4 only. IPv6 is still unsupported (will be supported when slirpvde
will be rewritten using the LWIPv6 network stack).
-----------------------------------
Repository : Main Repository
Name : vde2-slirp
Version : 2.3.2+svn587-3.23
Arch : x86_64
Vendor : SUSE LLC
Installed Size : 99.7 KiB
Installed : No
Status : not installed
Source package : vde2-2.3.2+svn587-3.23.src
Upstream URL : http://vde.sourceforge.net/
Summary : VDE ecryption module
Description :
slirpvde is a slirp interface for a VDE network.
Slirpvde connects all the units (virtual or real machines) to the network
of the host where slirpvde runs as it were a NAT/Masquerading router.
The default route is the node 2 (10.0.2.2 in the default network configuration)
and DNS is re-mapped in node 3 (10.0.2.3).
Slirpvde runs using standard user privileges (no need for root access):
all the connections are re-generated by slirpvde itself.
IPv4 only. IPv6 is still unsupported (will be supported when slirpvde
will be rewritten using the LWIPv6 network stack).