How to Install and Uninstall raspberrypi-firmware-config-camera Package on openSuSE Tumbleweed
Last updated: December 23,2024
1. Install "raspberrypi-firmware-config-camera" package
Please follow the guidance below to install raspberrypi-firmware-config-camera on openSuSE Tumbleweed
$
sudo zypper refresh
Copied
$
sudo zypper install
raspberrypi-firmware-config-camera
Copied
2. Uninstall "raspberrypi-firmware-config-camera" package
Please follow the steps below to uninstall raspberrypi-firmware-config-camera on openSuSE Tumbleweed:
$
sudo zypper remove
raspberrypi-firmware-config-camera
Copied
3. Information about the raspberrypi-firmware-config-camera package on openSuSE Tumbleweed
Information for package raspberrypi-firmware-config-camera:
-----------------------------------------------------------
Repository : openSUSE-Tumbleweed-Oss
Name : raspberrypi-firmware-config-camera
Version : 2023.11.21-1.2
Arch : noarch
Vendor : openSUSE
Installed Size : 3.0 KiB
Installed : No
Status : not installed
Source package : raspberrypi-firmware-config-camera-2023.11.21-1.2.src
Upstream URL : https://github.com/raspberrypi/firmware/
Summary : Configuration for the Raspberry Pi firmware loader
Description :
This package configures the Raspberry Pi boot process.
2 flavors are available:
* raspberrypi-firmware-config - the default config
* raspberrypi-firmware-config-camera - the config which enables
start_x=1 and increase gpu_mem to be able to use a camera module
Note: config.txt should not be used to set manually params (gpu_mem, etc.)
please create extraconfig.txt instead.
-----------------------------------------------------------
Repository : openSUSE-Tumbleweed-Oss
Name : raspberrypi-firmware-config-camera
Version : 2023.11.21-1.2
Arch : noarch
Vendor : openSUSE
Installed Size : 3.0 KiB
Installed : No
Status : not installed
Source package : raspberrypi-firmware-config-camera-2023.11.21-1.2.src
Upstream URL : https://github.com/raspberrypi/firmware/
Summary : Configuration for the Raspberry Pi firmware loader
Description :
This package configures the Raspberry Pi boot process.
2 flavors are available:
* raspberrypi-firmware-config - the default config
* raspberrypi-firmware-config-camera - the config which enables
start_x=1 and increase gpu_mem to be able to use a camera module
Note: config.txt should not be used to set manually params (gpu_mem, etc.)
please create extraconfig.txt instead.