How to Install and Uninstall watchdog.x86_64 Package on Rocky Linux 8
Last updated: November 14,2024
1. Install "watchdog.x86_64" package
Learn how to install watchdog.x86_64 on Rocky Linux 8
$
sudo dnf update
Copied
$
sudo dnf install
watchdog.x86_64
Copied
2. Uninstall "watchdog.x86_64" package
Please follow the instructions below to uninstall watchdog.x86_64 on Rocky Linux 8:
$
sudo dnf remove
watchdog.x86_64
Copied
$
sudo dnf autoremove
Copied
3. Information about the watchdog.x86_64 package on Rocky Linux 8
Last metadata expiration check: 0:18:42 ago on Mon Sep 12 10:27:18 2022.
Available Packages
Name : watchdog
Version : 5.15
Release : 2.el8
Architecture : x86_64
Size : 98 k
Source : watchdog-5.15-2.el8.src.rpm
Repository : baseos
Summary : Software and/or Hardware watchdog daemon
URL : http://sourceforge.net/projects/watchdog/
License : GPLv2+
Description : The watchdog program can be used as a powerful software watchdog daemon
: or may be alternately used with a hardware watchdog device such as the
: IPMI hardware watchdog driver interface to a resident Baseboard
: Management Controller (BMC). watchdog periodically writes to /dev/watchdog;
: the interval between writes to /dev/watchdog is configurable through settings
: in the watchdog sysconfig file. This configuration file is also used to
: set the watchdog to be used as a hardware watchdog instead of its default
: software watchdog operation. In either case, if the device is open but not
: written to within the configured time period, the watchdog timer expiration
: will trigger a machine reboot. When operating as a software watchdog, the
: ability to reboot will depend on the state of the machine and interrupts.
: When operating as a hardware watchdog, the machine will experience a hard
: reset (or whatever action was configured to be taken upon watchdog timer
: expiration) initiated by the BMC.
Available Packages
Name : watchdog
Version : 5.15
Release : 2.el8
Architecture : x86_64
Size : 98 k
Source : watchdog-5.15-2.el8.src.rpm
Repository : baseos
Summary : Software and/or Hardware watchdog daemon
URL : http://sourceforge.net/projects/watchdog/
License : GPLv2+
Description : The watchdog program can be used as a powerful software watchdog daemon
: or may be alternately used with a hardware watchdog device such as the
: IPMI hardware watchdog driver interface to a resident Baseboard
: Management Controller (BMC). watchdog periodically writes to /dev/watchdog;
: the interval between writes to /dev/watchdog is configurable through settings
: in the watchdog sysconfig file. This configuration file is also used to
: set the watchdog to be used as a hardware watchdog instead of its default
: software watchdog operation. In either case, if the device is open but not
: written to within the configured time period, the watchdog timer expiration
: will trigger a machine reboot. When operating as a software watchdog, the
: ability to reboot will depend on the state of the machine and interrupts.
: When operating as a hardware watchdog, the machine will experience a hard
: reset (or whatever action was configured to be taken upon watchdog timer
: expiration) initiated by the BMC.