How to Install and Uninstall ap-utils Package on Debian 11 (Bullseye)

Last updated: April 27,2024

1. Install "ap-utils" package

This guide let you learn how to install ap-utils on Debian 11 (Bullseye)


    
        
            $
        

        
            
                sudo apt update
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt install
            
                        
                ap-utils
            
                    
    
    Copied

2. Uninstall "ap-utils" package

Please follow the steps below to uninstall ap-utils on Debian 11 (Bullseye):


    
        
            $
        

        
            
                sudo apt remove
            
                        
                ap-utils
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt autoclean && sudo apt autoremove
            
                    
    
    Copied

3. Information about the ap-utils package on Debian 11 (Bullseye)

Package: ap-utils
Version: 1.5-5~bpo11+1
Installed-Size: 1320
Maintainer: Debian QA Group
Architecture: amd64
Depends: libc6 (>= 2.15), libncurses6 (>= 6), libtinfo6 (>= 6)
Description-en: Access Point SNMP Utils for Linux
A set of utilities for remotely administrating a variety of wireless
access points via SNMP:
* ap-auth - update authentication list
* ap-config - interactively configure or get statistics from
devices that support MIB-II, IEEE 802.11 MIB or NWN DOT11EXT MIB
and most Atmel-chipset based APs
* ap-gl - interactively configure or get statistics from
Atmel Prism-based APs
* ap-mrtg - get statistics from an AP in MRTG format
* ap-rrd - get statistics from an AP in RRDtool format
* ap-tftp - update AP firmware by TFTP
* ap-trapd - receive, parse and log trap messages from an AP
.
Access points supported include Global Sun ProWave GL2411AP, Compex
WavePort WP11, Linksys WAP11, SMC MC2655W, Netgear ME102, Edimax WLAN
Access Point, D-Link DWL 900AP and Eumitcom WA3001A. Others based on
Atmel chipsets or supporting MIB-II, IEEE 802.11 MIB and NWN DOT11EXT
MIB should also work.
Description-md5: e7c3191e2ce01e12305e29d8aa39358b
Homepage: http://ap-utils.polesye.net/
Section: net
Priority: optional
Filename: pool/main/a/ap-utils/ap-utils_1.5-5~bpo11+1_amd64.deb
Size: 285032
SHA256: 7179f2dc8e5b131aff46820e5b3ce5614f955dfaf99fb389f654f3030e0dfec5