How to Install and Uninstall ap-utils Package on Kali Linux
Last updated: April 27,2024
Deprecated! Installation of this package may no longer be supported.
1. Install "ap-utils" package
Learn how to install ap-utils on Kali Linux
$
sudo apt update
Copied
$
sudo apt install
ap-utils
Copied
2. Uninstall "ap-utils" package
Please follow the guidelines below to uninstall ap-utils on Kali Linux:
$
sudo apt remove
ap-utils
Copied
$
sudo apt autoclean && sudo apt autoremove
Copied
3. Information about the ap-utils package on Kali Linux
Package: ap-utils
Version: 1.5-5
Installed-Size: 1320
Maintainer: Debian QA Group
Architecture: amd64
Depends: libc6 (>= 2.15), libncurses6 (>= 6), libtinfo6 (>= 6)
Size: 284640
SHA256: c16baa8426bd5e8d07256cb633096adbd2084ce288ec4a158ff17728aeafd636
SHA1: eb3716e9b2ea0b666dd721516dc0d3cb74c72169
MD5sum: a7121da641e1d303e47585e7589fc6d1
Description: Access Point SNMP Utils for Linux
A set of utilities for remotely administrating a variety of wireless
access points via SNMP:
* ap-auth - update authentication list
* ap-config - interactively configure or get statistics from
devices that support MIB-II, IEEE 802.11 MIB or NWN DOT11EXT MIB
and most Atmel-chipset based APs
* ap-gl - interactively configure or get statistics from
Atmel Prism-based APs
* ap-mrtg - get statistics from an AP in MRTG format
* ap-rrd - get statistics from an AP in RRDtool format
* ap-tftp - update AP firmware by TFTP
* ap-trapd - receive, parse and log trap messages from an AP
.
Access points supported include Global Sun ProWave GL2411AP, Compex
WavePort WP11, Linksys WAP11, SMC MC2655W, Netgear ME102, Edimax WLAN
Access Point, D-Link DWL 900AP and Eumitcom WA3001A. Others based on
Atmel chipsets or supporting MIB-II, IEEE 802.11 MIB and NWN DOT11EXT
MIB should also work.
Description-md5: e7c3191e2ce01e12305e29d8aa39358b
Homepage: http://ap-utils.polesye.net/
Tag: network::scanner, protocol::snmp, role::program, scope::utility,
uitoolkit::ncurses
Section: net
Priority: optional
Filename: pool/main/a/ap-utils/ap-utils_1.5-5_amd64.deb
Version: 1.5-5
Installed-Size: 1320
Maintainer: Debian QA Group
Architecture: amd64
Depends: libc6 (>= 2.15), libncurses6 (>= 6), libtinfo6 (>= 6)
Size: 284640
SHA256: c16baa8426bd5e8d07256cb633096adbd2084ce288ec4a158ff17728aeafd636
SHA1: eb3716e9b2ea0b666dd721516dc0d3cb74c72169
MD5sum: a7121da641e1d303e47585e7589fc6d1
Description: Access Point SNMP Utils for Linux
A set of utilities for remotely administrating a variety of wireless
access points via SNMP:
* ap-auth - update authentication list
* ap-config - interactively configure or get statistics from
devices that support MIB-II, IEEE 802.11 MIB or NWN DOT11EXT MIB
and most Atmel-chipset based APs
* ap-gl - interactively configure or get statistics from
Atmel Prism-based APs
* ap-mrtg - get statistics from an AP in MRTG format
* ap-rrd - get statistics from an AP in RRDtool format
* ap-tftp - update AP firmware by TFTP
* ap-trapd - receive, parse and log trap messages from an AP
.
Access points supported include Global Sun ProWave GL2411AP, Compex
WavePort WP11, Linksys WAP11, SMC MC2655W, Netgear ME102, Edimax WLAN
Access Point, D-Link DWL 900AP and Eumitcom WA3001A. Others based on
Atmel chipsets or supporting MIB-II, IEEE 802.11 MIB and NWN DOT11EXT
MIB should also work.
Description-md5: e7c3191e2ce01e12305e29d8aa39358b
Homepage: http://ap-utils.polesye.net/
Tag: network::scanner, protocol::snmp, role::program, scope::utility,
uitoolkit::ncurses
Section: net
Priority: optional
Filename: pool/main/a/ap-utils/ap-utils_1.5-5_amd64.deb