How to Install and Uninstall bladerf-fpga-hostedx40 Package on Kali Linux

Last updated: November 22,2024

1. Install "bladerf-fpga-hostedx40" package

Please follow the steps below to install bladerf-fpga-hostedx40 on Kali Linux


    
        
            $
        

        
            
                sudo apt update
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt install
            
                        
                bladerf-fpga-hostedx40
            
                    
    
    Copied

2. Uninstall "bladerf-fpga-hostedx40" package

Here is a brief guide to show you how to uninstall bladerf-fpga-hostedx40 on Kali Linux:


    
        
            $
        

        
            
                sudo apt remove
            
                        
                bladerf-fpga-hostedx40
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt autoclean && sudo apt autoremove
            
                    
    
    Copied

3. Information about the bladerf-fpga-hostedx40 package on Kali Linux

Package: bladerf-fpga-hostedx40
Source: bladerf
Version: 0.2023.02-4
Installed-Size: 41
Maintainer: A. Maitland Bottoms
Architecture: all
Provides: bladerf-fpga
Depends: ca-certificates, libbladerf2, wget
Recommends: bladerf
Suggests: bladerf-firmware
Size: 21408
SHA256: 2532d3d44709402823819b061074e8745d0fc6f7f503c8d3f421815fc90145ef
SHA1: 8d6a2d059bba963334f0ef3b14c0e74e1db42284
MD5sum: 368faa8e474de47141941c1bd2927574
Description: Nuand bladeRF FPGA bitstream downloader (hostedx40)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
http://Nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
.
This bitstream is for the bladeRF x40 with the Altera Cyclone IV
EP4CE40 FPGA.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
Description-md5:
Homepage: https://www.Nuand.com/bladeRF
Section: contrib/comm
Priority: optional
Filename: pool/contrib/b/bladerf/bladerf-fpga-hostedx40_0.2023.02-4_all.deb