How to Install and Uninstall bladerf-fpga-hostedx40 Package on Ubuntu 21.10 (Impish Indri)

Last updated: December 25,2024

1. Install "bladerf-fpga-hostedx40" package

This tutorial shows how to install bladerf-fpga-hostedx40 on Ubuntu 21.10 (Impish Indri)

$ sudo apt update $ sudo apt install bladerf-fpga-hostedx40

2. Uninstall "bladerf-fpga-hostedx40" package

Please follow the instructions below to uninstall bladerf-fpga-hostedx40 on Ubuntu 21.10 (Impish Indri):

$ sudo apt remove bladerf-fpga-hostedx40 $ sudo apt autoclean && sudo apt autoremove

3. Information about the bladerf-fpga-hostedx40 package on Ubuntu 21.10 (Impish Indri)

Package: bladerf-fpga-hostedx40
Architecture: all
Version: 0.2019.07-7
Priority: extra
Section: universe/comm
Source: bladerf
Origin: Ubuntu
Maintainer: Ubuntu Developers
Original-Maintainer: A. Maitland Bottoms
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Installed-Size: 29
Provides: bladerf-fpga
Depends: ca-certificates, libbladerf2, wget
Recommends: bladerf
Suggests: bladerf-firmware
Filename: pool/universe/b/bladerf/bladerf-fpga-hostedx40_0.2019.07-7_all.deb
Size: 5340
MD5sum: de8cf9fe8c7f99b9681eced7013288fc
SHA1: 32248a99828040d2ce7b28b20e34f46e7760289a
SHA256: 8ac03f22f6bd891266cfb072561e6f6b2f6e84fdd433bb15a30a1c9dfc21a53d
SHA512: 76f41766a469bb2e314c1b63822756faf8dbb6bcf8651613ff147669a4444abec313050efb8160300f49538d57bf763915c030dcac7ec8d1a6cbabcf29d820df
Homepage: https://www.Nuand.com/bladeRF
Description-en: Nuand bladeRF FPGA bitstream downloader (hostedx40)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
http://Nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
.
This bitstream is for the bladeRF x40 with the Altera Cyclone IV
EP4CE40 FPGA.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
Description-md5: 9c067a60acfcb3d3e8746ad8b8cfb5d9