How to Install and Uninstall bladerf-fpga-hostedxa4 Package on Ubuntu 21.10 (Impish Indri)
Last updated: December 25,2024
1. Install "bladerf-fpga-hostedxa4" package
Please follow the instructions below to install bladerf-fpga-hostedxa4 on Ubuntu 21.10 (Impish Indri)
$
sudo apt update
Copied
$
sudo apt install
bladerf-fpga-hostedxa4
Copied
2. Uninstall "bladerf-fpga-hostedxa4" package
This is a short guide on how to uninstall bladerf-fpga-hostedxa4 on Ubuntu 21.10 (Impish Indri):
$
sudo apt remove
bladerf-fpga-hostedxa4
Copied
$
sudo apt autoclean && sudo apt autoremove
Copied
3. Information about the bladerf-fpga-hostedxa4 package on Ubuntu 21.10 (Impish Indri)
Package: bladerf-fpga-hostedxa4
Architecture: all
Version: 0.2019.07-7
Priority: optional
Section: universe/comm
Source: bladerf
Origin: Ubuntu
Maintainer: Ubuntu Developers
Original-Maintainer: A. Maitland Bottoms
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Installed-Size: 29
Provides: bladerf-fpga
Depends: wget
Recommends: bladerf
Suggests: bladerf-firmware
Filename: pool/universe/b/bladerf/bladerf-fpga-hostedxa4_0.2019.07-7_all.deb
Size: 6468
MD5sum: 08994a0e1b8e3fe8a7f10ae272585747
SHA1: 39ded31c96efc849fb4843a96e47cd48ed610822
SHA256: a51c748ae24a6b3acfcf2cb3549f64e4ab51aa6c7d1646eb3baf5ef348c22c27
SHA512: 29149ed1e1bbf03a2ecfc50ac375c3788a3779396c2d5938327c277894e3ff0884a8b1d8bbbc72115e33a7666c8274bb3b571d67243ceed6e7f1369c7386a2f4
Homepage: https://www.Nuand.com/bladeRF
Description-en: Nuand bladeRF FPGA bitstream downloader (hostedxA4)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
.
This bitstream is for the bladeRF 2.0 Micro xA4 with the Altera Cyclone V
5CEBA4 FPGA.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
Description-md5: cb79f457caed164ec9b959f01add116e
Architecture: all
Version: 0.2019.07-7
Priority: optional
Section: universe/comm
Source: bladerf
Origin: Ubuntu
Maintainer: Ubuntu Developers
Original-Maintainer: A. Maitland Bottoms
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Installed-Size: 29
Provides: bladerf-fpga
Depends: wget
Recommends: bladerf
Suggests: bladerf-firmware
Filename: pool/universe/b/bladerf/bladerf-fpga-hostedxa4_0.2019.07-7_all.deb
Size: 6468
MD5sum: 08994a0e1b8e3fe8a7f10ae272585747
SHA1: 39ded31c96efc849fb4843a96e47cd48ed610822
SHA256: a51c748ae24a6b3acfcf2cb3549f64e4ab51aa6c7d1646eb3baf5ef348c22c27
SHA512: 29149ed1e1bbf03a2ecfc50ac375c3788a3779396c2d5938327c277894e3ff0884a8b1d8bbbc72115e33a7666c8274bb3b571d67243ceed6e7f1369c7386a2f4
Homepage: https://www.Nuand.com/bladeRF
Description-en: Nuand bladeRF FPGA bitstream downloader (hostedxA4)
This empty package will, at the time of installation, download an appropriate
FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
configuration. The FPGA bitstream will be downloaded from
https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
.
This bitstream is for the bladeRF 2.0 Micro xA4 with the Altera Cyclone V
5CEBA4 FPGA.
.
Note that this will not upgrade the bladeRF itself. That can be done
with the bladeRF-cli utility.
Description-md5: cb79f457caed164ec9b959f01add116e