How to Install and Uninstall ixo-usb-jtag Package on Ubuntu 21.04 (Hirsute Hippo)

Last updated: May 19,2024

1. Install "ixo-usb-jtag" package

Please follow the guidance below to install ixo-usb-jtag on Ubuntu 21.04 (Hirsute Hippo)


    
        
            $
        

        
            
                sudo apt update
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt install
            
                        
                ixo-usb-jtag
            
                    
    
    Copied

2. Uninstall "ixo-usb-jtag" package

This tutorial shows how to uninstall ixo-usb-jtag on Ubuntu 21.04 (Hirsute Hippo):


    
        
            $
        

        
            
                sudo apt remove
            
                        
                ixo-usb-jtag
            
                    
    
    Copied


    
        
            $
        

        
            
                sudo apt autoclean && sudo apt autoremove
            
                    
    
    Copied

3. Information about the ixo-usb-jtag package on Ubuntu 21.04 (Hirsute Hippo)

Package: ixo-usb-jtag
Architecture: all
Version: 0.0.1-2
Priority: optional
Section: universe/embedded
Origin: Ubuntu
Maintainer: Ubuntu Developers
Original-Maintainer: Stefano Rivera
Bugs: https://bugs.launchpad.net/ubuntu/+filebug
Installed-Size: 88
Suggests: fxload
Filename: pool/universe/i/ixo-usb-jtag/ixo-usb-jtag_0.0.1-2_all.deb
Size: 10948
MD5sum: 3dfe3e85ca8062fff34f78a122b9755c
SHA1: c6d0b0d4535bbaf4b630ec52e00b77a88c6fa367
SHA256: 1a777ef25e70e596ac3eb63626b4576bf7796b4bcc1ae551fbd02fbc766360da
SHA512: b2b583887d95c6810d66083b7c019fbbe3d4a8e6a38eef52df18d3f4e07fec75950f0ef06308ea06f18e7b1bd1e35711863b668b27d978021ba55463f35f9a46
Homepage: https://github.com/mithro/ixo-usb-jtag
Description-en: Altera Bus Blaster emulation using Cypress FX2 chip
This firmware allows a USB-capable microcontroller to act like an Altera
USB-Blaster JTAG pod. Which in turn may allow you to use tools you'd normally
use with the Altera USB-Blaster, including UrJTAG and openocd.
.
Supported hardware: The Cypress FX2 EZ-USB family, or an FTDI FT245 in
combination with a CPLD. Builds are included for the hdmi2usb project's boards
(Digilet Nexys, Nexys2, Atlys and Numato Opsis).
Description-md5: cbed5c2c8e85384e518593f58ca00451